🚗 Reflective Car Sticker Strip for Trunk & Rear Bumper

🌙 Brighter Under Headlights: Adds a noticeable reflective accent to your vehicle’s rear.

🔷 Microprismatic Surface: Fine honeycomb structures return incoming light towards its source.

🌦️ Weather-Resistant Finish: Designed for everyday outdoor exposure to rain and sunlight.

🧩 Easy Adhesive Installation: Clean the surface, peel the backing and press firmly.

🎨 Five Colour Options: Choose red, yellow, blue, green or white.

🌙 DARK ROADS. A DETAIL THAT STANDS OUT.

Give Your Rear Bumper a Brighter Accent

On an unlit road, dark bodywork can be difficult to pick out. Whether you’re heading home after work or setting off before sunrise, a reflective detail adds contrast when headlights reach your vehicle.

A simple addition for the journeys you make every day.

❌ Plain Paint Offers Little Reflective Detail

Your bumper may look polished in daylight, yet become much less noticeable against dark surroundings after sunset.

✓ Add a Strip That Reflects Incoming Light

Position the strip on a suitable rear surface to create a defined reflective line under direct illumination.

No wiring. No batteries. Just peel, position and press.

🚗 A Small Upgrade. A More Noticeable Finish.

Give your car a clean styling accent with a practical reflective surface. This slim adhesive strip combines a honeycomb texture with a long, tapered shape that sits neatly across compatible bumper or boot surfaces.

Subtle in normal daylight, it becomes brighter when illuminated by incoming headlights.

FEATURES

🌙 BRIGHTER WHEN THE LIGHT REACHES IT

The strip responds to headlights and other direct light sources, adding reflective contrast to your vehicle’s rear. Its brightness varies with the lighting and viewing angle—it works by reflecting light rather than producing its own.

🔷 SMALL PRISMS. A DISTINCTIVE REFLECTION.

Look closer and you’ll see the fine honeycomb pattern across the surface. These microprismatic structures redirect incoming light towards its source, giving the strip its characteristic reflective appearance.

🌦️ MADE FOR EVERYDAY OUTDOOR EXPOSURE

A protective outer layer helps the reflective surface handle normal exposure to rain and sunlight. Apply it to a properly prepared surface so the adhesive can make even contact along the strip.

🧩 CLEAN. ALIGN. PRESS.

Refresh your rear styling without a complicated fitting process. Remove dirt, wax, grease and moisture, check the position, then peel back the liner gradually and press firmly across the entire strip.

🎨 FIVE COLOURS. YOUR FINISH.

Choose from red, yellow, blue, green or white to complement your vehicle. The slim profile and tapered ends create a neat horizontal accent without bulky fittings.

📏 Check the Fit Before You Apply

The strip measures approximately 90 cm / 35.4 in long and 0.58 mm thick.

Measure your chosen installation area before ordering. Select a smooth, compatible surface with enough space for the full strip, keeping all lights, number plates, cameras and sensors clear.

❓ Frequently Asked Questions

Does it light up by itself?

No. It reflects incoming light, such as headlights or a torch. It does not require electricity and will not glow in complete darkness.

Where can I install it?

On a suitable clean, smooth rear bumper or boot surface. Check the available space and surface compatibility before applying.

Is it suitable for outdoor use?

The strip is described as weather-resistant for normal outdoor exposure. Correct surface preparation and firm application help the adhesive make proper contact.

How do I apply it?

Clean and completely dry the surface. Check the alignment, peel away the backing gradually, then press firmly across the strip, paying particular attention to the edges.

Will it fit every car?

Fit depends on your vehicle’s surface shape and available space. Measure the intended area against the approximately 90 cm strip before ordering.

Which colours are available?

Red, yellow, blue, green and white. Check local requirements for reflective colours and placement before choosing.

PRODUCT DETAILS

• Product: Reflective Car Sticker Strip

• Surface: Microprismatic honeycomb texture

• Installation: Adhesive backing

• Length: Approximately 90 cm / 35.4 in

• Thickness: 0.58 mm

• Colours: Red, Yellow, Blue, Green, White

PACKAGE INCLUDES

1 × Reflective Car Sticker Strip in your selected colour.

PLEASE NOTE

Reflective performance depends on incoming light, angle, cleanliness and installation. This accessory does not replace required vehicle lights or reflectors. Keep essential vehicle equipment unobstructed. Actual colour may vary slightly with lighting and screen settings.

🚗 Choose Your Colour. Add Your Reflective Accent.

A neat finishing touch for your rear bumper, with reflective detail that stands out under incoming light.

CHOOSE YOUR COLOUR & ADD TO CART